New MEP SHARK 332-1 NC 5.0 MDE metal band saw
Niederlangen6596 km to "United States/Columbus"
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 5939 9...
Show
+49 5939 940640
+49 5939 9...
Show
+49 5939 940650
Germany 
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
capacity 90 degrees: flat 330 x 260 mm
capacity 90 degrees: square 260 x 260 mm
capacity 45 degrees: round 260 mm
capacity 45 degrees: flat 270 x 200 mm
capacity 60 degrees: round 180 mm
capacity 60 degrees: flat 170 x 170 mm
height of material-table 600 mm
Pitch min/max 50.000 mm
vice 335 mm Öffnung
band speed 15 - 100 m/min
automatic feeds 600 mm
dimensions of saw-band 3650 x 27 x 0,9 mm
total power requirement 2,2 kW
weight 1.105 kg
Control
range L-W-H 3,3 x 2,83 x 2,23 m
electro-hydraulic band saw fully automatic, with additional :
* semi-automatic
* semi-automatic-dynamic
* manual .. operation
Description:
- robust electro-hydraulic band saw fully automatic (INDUSTRY)
* MEP - WINDOWS numerical control unit
* User interface with 7” touch screen display
* mechanical buttons for the sawing machine’s operating functions
* guarantees reliable operation, simple and intuitive
* real-time control of all cutting parameters
* pivoting arm enables comfortable and safe operation
* display and recording of alarm and error messages
- miter cuts with automatic cycle from 0 to 60 left
- semi-automatic, semi-automatic-dynamic and manual cycle
* miter cuts from 45 right to 60 left
- manual or semi-automatic dynamic cycle selectable
* to make cuts without programming
- protective housing for the safety of the worker
- continuous regulation of the cutting speed from 15 to 100 m/min
* via frequency converter (inverter)
- Latest generation hydraulic unit
* extremely powerful with low energy consumption.
- Material feed with stepper motor via ball screw
* mounted on opposing ball bearings
* Single stroke 600 mm repeatable to saw any length.
- Positioning of the saw head and movement of the feeder using a joystick.
- Automatic detection of the cutting start position
- Manually operated band tension control with display
* using an electronic converter
- Automatic monitoring of the cutting load
* using a servo valve mounted directly on the cylinder
- The coolant tray is built into the base frame
- Chip removal brush
- Bimetal saw band for solid and profile material
- Tools and operating instructions with spare parts list
* Angularity = 2/12 degrees
* Length accuracy = plus/minus 0.1 mm per feed
** SPECIAL ACCESSORIES INCLUDED:
- MEP LubeCut micro dosing device
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Schnittbereich bei 90 Grad: flach 330 x 260 mm
Schnittbereich bei 90 Grad: vierkant 260 x 260 mm
Schnittbereich bei 45 Grad: rund 260 mm
Schnittbereich bei 45 Grad: flach 270 x 200 mm
Schnittbereich bei 60 Grad: rund 180 mm
Schnittbereich bei 60 Grad: flach 170 x 170 mm
Vorschub min/max 50.000 mm
Bandgeschwindigkeit 15 - 100 m/min
Vorschub automatisch 600 mm
Gesamtleistungsbedarf 2,2 kW
Gewicht 1.105 kg
Steuerung
Abmessung L-B-H 3,3 x 2,83 x 2,23 m