New MEP SHARK 332-1 NC 5.0 metal band saw
Niederlangen
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 5939 9...
Show
+49 5939 940640
+49 5939 9...
Show
+49 5939 940650
Germany 
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
saw band length 3650 mm
cutting width 330 mm
dimensions of saw-band 3650 x 27 x 0,9 mm
band speed 15 - 100 m/min
capacity 90 degrees: round 300 mm
capacity 90 degrees: square 260 mm
capacity 90 degrees: flat 330 x 260 mm
capacity 45 degrees: round li. 260 / re. 200 mm
capacity 45 degrees: square li. 250 / re. 180 mm
capacity 45 degrees: flat li. 270x200 re. 200x160 mm
capacity 60 degrees: round li. 180 mm
capacity 60 degrees: square li. 170 mm
capacity 60 degrees: flat li. 170 x 170 mm
motor 2,2 kW
weight of the machine ca. 1,1 t
dimensions of the machine ca. 1,9 x 1,8 m
Powerful miter band saw for cuts from 45 right to 60 left
Electro-hydraulic CNC machine with Windows CE based touch screen control
-Automatic cycle (cuts from 0 to 60 left)
-Semi-automatic, semi-automatic-dynamic and manual cycle (cuts from 45 right
to 60 left).
-Manual or semi-automatic dynamic cycle to make cuts outside of series
production directly without programming.
-Numerically controlled band saw machines with the new Windows âCEâ based
control, specially developed by MEP for automatic machines.
FEATURES:
-User interface with 7 âtouch screen display and mechanical keys for the
operating functions of the sawing machine, guarantees reliable operation,
simple and intuitive, and real-time control of all cutting parameters.
- Protective housing for the safety of the worker
-The control console on a swiveling arm enables comfortable and safe operation
from any position.
-Display and entry of alarm and error messages with the option of displaying
incidents that have occurred.
- Infinitely variable regulation of the cutting speed from 15 to 100 m / min
via frequency converter (inverter).
-The latest generation of hydraulic power pack, extremely powerful with low
energy consumption.
-Material feed with stepper motor via ball screw mounted on opposing ball
bearings; 600 mm repeatable single stroke to saw any length.
-Positioning of the saw head and movement of the feeder using a joystick.
-Automatic detection of the cutting start position.
-Hand-operated strap tension control with indication on the display by means of
an electronic converter.
-Automatic monitoring of the cutting load through a servo valve mounted
directly on the cylinder.
-The coolant pan (equipped with 2 electric pumps for lubrication and cooling of
the saw band) is built into the underframe
-The chip drawer can be replaced by a motorized chip conveyor - see special
accessories.
-Preparation for the installation of the OPTIONAL minimum quantity lubrication
system in addition to the conventional standard lubrication with emulsion oil.
-Schipping brush.
-Bimetal saw band for solid and profile material.
-Tool and instructions for use with list of spare parts.
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.