Chiron FZ 08K S Magnum SK machining centre
≈ $66,730
Weißenfels
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
Germany 
Germany, Location:stuttgart
Germany, Weißenfels
Germany, Weißenfels
Germany, Weißenfels
Germany, Weißenfels
Germany, Weißenfels
Germany, Weißenfels
Germany, Location:stuttgart
Germany, Weißenfels
Germany, Kaiserslautern
Germany, Weißenfels
Germany, Weißenfels
Germany, Kaiserslautern
Chiron
Model
FZ 08K S Magnum SK
Year
2007 - 2017
Observations
Vertical CNC machining center - 5 axis
Overall Review: Factory Refurbishment in 2017
Working hours: approx. 22,500 h
With NC swivel head, rotary table, bar feeder and discharge system
CNC Control & System:
Control CNC: Siemens 840D
Cabezal basculante NC
Swivel range: -20° / +115°
Husillo principal:
Type: Water-cooled motorized spindle
Maximum Speed:
15,000 rpm
Working routes:
X-axis: 450 mm
Y-axis: 270 mm
Z-axis: 310 mm
Speeds:
Fast forward: X/Y/Z: 75 m/min
Acceleration: X: 1 g. Y: 1.5 g. Z: 2 g
Tool Changer:
Number of tools: 40 positions
Cone Type: HSK-A40
Tool-to-tool changeover time: 2.6 seconds (vertical)
Additional equipment:
· Preparation for bar machining
· AWU 160 rotary table
· Rotary table diameter: 105 mm
· Additional positioning axis
· Plato portapinzas Hainbuch Spanntop D100
· Additional device for machining the sixth side
· Automatic system for extraction and evacuation of finished parts
· IRCO SiMag 100.1-3000 Bar Feeder for Round and Roll Forming Material
· Washing Gun
· Preparation for internal tool cooling (IKZ)
· 70 bar high-pressure system with Varioventil valve
· Device Washing
· Chip Conveyor Type Scraper
· Chip discharge height: 1050 mm
· VRF Rotary Vacuum Filter 400 Liters Manufacturer KNOLL
· MAHLE Switched Dual Filter
· Electric cabinet refrigerator
· Signal light tower
· Tool Life Monitoring
· Single F500 Tool Break Control
· Renishaw TS27R 3D Probing System
· Brankamp Marposs CMS 100 Collision Monitoring System
Accessories included:
· Breuning IRCO Guide Channel Sets
· Hainbuch clamping pliers (according to agreement)
· Approximately 500 HSK-A40 tool holders
· Spare parts for this type of machine
· Machine-specific consumables
Production Concept:
The facility is designed for 24/7 automated production of cubic parts without a handle.
The material is fed by a bar feeder up to 100 mm in diameter and 3000 mm in length, for both round and profiled material.
The rotary table acts as a positioning axis, allowing the four side faces to be machined using the vertical milling spindle.
The fifth side is machined horizontally using the tilting head.
The workpiece is then cut, rotated 180° and the sixth side is machined also with the tilting head.
The finished parts are automatically removed by a handling system and deposited in a parts magazine.
Machine Status:
· General review carried out by the manufacturer in 2017
· Last spindle change made in September 2025
· Last full annual maintenance performed in October 2025
· The machine has been continuously maintained by the manufacturer through a full service contract, including preventive maintenance and technical upgrades.