Modular 10T 4S 4E labeling machine
(Verona) - Italy7231 km from you
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+39 392 456...
Show
+39 392 456 1373
+39 340 227...
Show
+39 340 227 2376
+39 344 035...
Show
+39 344 035 4270
Italy 
Italy, (Verona) - Italy
Modular labeling machine 10 heads
Modular labeling machine
Cold glue
• 4 stations: Front/back, seal L, neck ring
self-adhesive
• 3 stations: Front/back, neck ring
Bottles :
round/square
Label stations nr.:
N. 3 self-adhesive stations
N. 3 Cold glue stations
Central diameter Ø:
Ø 960
Plates nr.:
10
Length of the labels min/max:
10/150
Height of the label min/max:
15/200
Container diameter/height min/max:
Ø 30/80 mm – Altezza min/max 100/400 mm
Plate transmission
Motorized plate
Optical centering
Yes
Special inlet stars
No. 3 multi-format in/out stars D 50->120 mm
Industria 4.0
yes predisposed
other request
Double screw input in phase
Max speed request:
6.500 bph
Modular labeling machine: basic machine composition
1. System built according to CE regulations
2. Machine operation via PLC (Schneider)
3. Touch-screen control panel for labeler functions installed on a mobile and rotating support
4. Automatic variation of production speed with inverters and detection sensors installed on the conveyor belts
5. Light column indicating the operating status of the labeler
6. Electrical cabinet fixed internally to the machine body.
7. Accident prevention protections consisting of:
➢ On the screw front, with two swing doors
➢ On the labeling station front, single-part circulars a
vertical lift
8. Height-adjustable upper head for different containers with gearmotor, panel adjustment, and automatic stop limit switch
9. Plate rotation via electronic cams
10. Shaped plates
11. The transmission between the plate and the motor occurs via a maintenance-free gear reducer
12. Quick plate change
13. The body of plates removable from the lower carousel (complete with all their transmission)
14. Double inlet auger with stop-in phase
15. N. 3 40M adhesive labeling stations, including:
· Stepper motor
· Machine stops after two labels are missing on the reel
· Memory for 200 different labels
· Automatic missing label recovery function
· 4-axis adjustment system, without tools
· Reel exhaustion sensor
· Standard photocell for labels FOR TRANSPARENT
16. L-shaped sealing pliers with 4 DIVISIONS
17. N.3 Cold glue labeling station, type: 2-2-150, including:
· Motorization with servomotor
· Automatic glue film adjustment
· Automatic washing of the drum tweezers for label removal.
· Glue pump
· Forced oil lubrication
· No greasing points
· Radial and tangential adjustment with machine in production
· MANUAL GROUP HEIGHT ADJUSTMENT WITHOUT HEIGHT CHANGE
18. Teleassistance
19. N.1 Equipment for CYLINDRICAL container format consisting of:
· Nr. 1 container introduction screws with UNIVERSAL container shape FOR BOTTLE DIAMETERS FROM 50 TO 120 MM
· Nr. 1 UNIVERSAL entry/exit star WITH HANDS
· Nr. 1 central container guide
· No. 10 clay pigeons
20. Optical centering LOGO OR WELDING following with FOLLOWER 2 system
21. N. 5 Smoothing station for labels
22. N.1 Cold glue body label or back label equipment
· N. 1 label warehouse
· N. 1 set of label-picking pallets;
· N. 1 label picking pliers drum;
· N.1 label smoothing station.
23. N.1 Label equipment for cold glue collar
· N. 1 label warehouse
· N. 1 set of label-picking pallets;
· N. 1 label picking pliers drum;
· N.1 label smoothing station.
24. N.1 Cold glue “L” seal equipment
· N. 1 label warehouse
· N. 1 set of label-picking pallets;
· N. 1 label picking pliers drum;
· N.1 set of pads and hands for the seal pliers.
Modular labeling machine standard parameters
✓ Supporting and upper structure in hot-dip galvanized steel
✓ Top and side cover in AISI 304
➢ Container transfer
The spacer screw, the input/output stars, and the central guide are made of wear-resistant synthetic material. The lateral and belt sliding guides are made of plastic
➢ Carousel
The container locking heads have a height tolerance of up to 15 mm
➢ PLATE HANDLING: ELECTRONIC CAM
➢ Self-adhesive labeling station
The self-adhesive station was created in modules independent of each other and fixed on a modular aluminum profile – Paper unwinder – Label peeling blade – Drive roller – Support paper rewinder – Electrical panel with quick connections.
Each individual group can be quickly and easily replaced.
The station is fixed to a solid mechanical structure, equipped with 4 adjustment axes, complete with format position indicators.
The technique of the Modular labeler:
The label drive motor is perfectly synchronized with the speed of the labeler detected and controlled by a single high-resolution encoder.
The label dispensing speed is variable. By stopping the machine during labeling with the label dispensed halfway, it is possible to restart without having defects in the application of the label on the container.
The paper drive roller is specifically treated to prevent glue residues from self-adhesive labels from adhering (the option is present starting from 60 MT/min modules).
Ergonomic: all adjustments take place in the upper part of the self-adhesive assembly.
All adjustments occur without tools and are indicated in red. The degree of protection is IP65.
Electronics
Digital control electronics.
Terminal for programming and storing the various types of labels (200 max).
No mechanical/manual adjustment of the speed ratio and format adjustment.
The machine stops after two labels are missing on the reel.
Automatic missing label recovery function.
➢ Smoothing
The smoothing, customized for each individual format, includes brushes and/or rollers that can be removed as a whole for replacement without the use of tools.
For certain applications, an additional smoothing device can be mounted on the belt.
➢ Transmission and main control
The transmission to all moving parts is given by alternating gears in C40 and Zellamid steel.
The central motorization is provided by a gear motor driven by an “Inverter” electronic frequency converter.
➢ Speed regulation and automatic control
The production speed of the machine is totally automatic and is variable based on the incoming flow and outgoing disposal of the containers. Furthermore, a stop device, installed at the machine entrance, guarantees a minimum accumulation of containers at the machine entrance and an automatic safety stop in the event of an accumulation of containers at the machine exit. Everything is managed by a PLC.
➢ Pneumatic system
Service group incorporated into the modular labeling machine with regulation valve and water separating filter ready for an existing connection.
➢ Electrical installation
CE-compliant system, ready for connection to the network. Voltage according to customer specifications. Control voltage 24 V DC
➢ Maintenance
Manual, individual, and grouped greasing points. Low-maintenance materials are used on the panel, such as sealed ball bearings and self-lubricating sliding materials. Periodic check of the oil level in the spacer screw.
The Manufacturer reserves the right to make technical changes based on what is described.
techniqueThe label drive motor is perfectly synchronized with the speed of the labeler detected and controlled by a single high-resolution encoder.
The label dispensing speed is variable. By stopping the machine during labeling with the label dispensed halfway, it is possible to restart without having defects in the application of the label on the container.
The paper drive roller is specifically treated to prevent glue residues from self-adhesive labels from adhering (the option is present starting from 60 MT/min modules).
Ergonomic: all adjustments take place in the upper part of the self-adhesive assembly.
All adjustments occur without tools and are indicated in red. The degree of protection is IP65.
Electronics
Digital control electronics.
Terminal for programming and storing the various types of labels (200 max).
No mechanical/manual adjustment of the speed ratio and format adjustment.
The machine stops after two labels are missing on the reel.
Automatic missing label recovery function.
➢ Smoothing
The smoothing, customized for each individual format, includes brushes and/or rollers that can be removed as a whole for replacement without the use of tools.
For certain applications, an additional smoothing device can be mounted on the belt.
➢ Transmission and main control, Optical centering, and electronic cams
The transmission to all moving parts is given by alternating gears in C40 and Zellamid steel.
The central motorization is provided by a gear motor driven by an “Inverter” electronic frequency converter.
➢ Speed regulation and automatic control
The production speed of the modular labeling machine is totally automatic and is variable based on the incoming flow and outgoing disposal of the containers. Furthermore, a stop device, installed at the machine entrance, guarantees a minimum accumulation of containers at the machine entrance and an automatic safety stop in the event of an accumulation of containers at the machine exit. Everything is managed by a PLC.
➢ Pneumatic system
Service group incorporated into the machine with regulation valve and water separating filter ready for an existing connection.
➢ Electrical installation
CE compliant sy
Speed: 6500 BPH
Containers: Glass
Safety features: Yes
Manuals: Yes
No. of plates: 10
Rotation direction: Counterclockwise
Plate movement: Electronic brushless motors
Number of stations: 7
Labeling method: Adhesive, Cold glue
Label placement: Front, Back, Neck ring label, Tax stamp/seal
Label adjustment: Auto
Optical centering system: Optical fiber
Head adjustment: Electric
Add. label smoothing at machine exit: Yes