Krauss Maffei 1000-8000 M injection moulding machine
Kaiserslautern
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 162 58...
+49 162 5858448
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Gräfelfing
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
50 Hz
Germany, Kaiserslautern
Germany, Kaiserslautern
50 Hz
Germany, Kaiserslautern
50 Hz
Germany, Kaiserslautern
Germany, Kaiserslautern
Location: DE
Screw speed: 92 rpm
Injection measurement stroke: 200 mm
Metering stroke: approx. 465 mm
Injection pressure limit: 185 bar
Pump differential pressure: 10 bar
Main pressure: 250 bar
Injection pressure: 185 bar
Hydraulic circuit: 150 bar
Secondary pressure: 120 bar
Auxiliary pressure: 50 bar
Closing pressure drop: approx. 4–6 bar/min
Minimum: 50 bar
Maximum: 150 bar
Number of heating zones: 9
Cylinder heater power examples: 9100 W, 8200 W, 6200 W, 5200 W, 2400 W, 650 W, 300 W
Operating voltages recorded: 230 V, 220 V, 380 V
Temperature accuracy deviation: approx. −1 K to +2 K
Injection unit alignment: 0.0 mm longitudinal deviation
Clamping unit deviations: +0.3 / −0.4 / +0.3
ISO cleanliness class: 16/14/11
Viscosity at 40°C: approx. 45 mm²/s
Viscosity at 100°C: approx. 6.6 mm²/s
Viscosity index: approx. 99
Particle contamination level: low (lab report)
Robot: REMAK RE-CNC
C-axis folding: 90°
A-axis rotary: 90°
B-axis rotary: 270°
X: 1000 mm
Y: 1400 mm
Z: 3500 mm
Injection unit
Injection speed stages
25% → 23 mm/s
50% → 46 mm/s
75% → 69 mm/s
100% → 92 mm/s
Hydraulic system
Pressure circuits
Proportional valve pressure ranges
Condition / maintenance relevant data
Machine alignment tolerance
Hydraulic oil condition
Water content
Maintenance status (documented work)
Electrical inspection performed
Mechanical maintenance performed
Hydraulic hose inspection performed
Oil analysis performed
Vibration measurements performed
Calibration and adjustment performed
Machine alignment check performed
Additional equipment