Kawasaki KMX15NB 31Q9-16110 hydraulic control valve for Hyundai R320LC-9 R320-9 midi excavator
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+86 189 289...
+86 189 2896 5241
China
China
China
Product Overview
The Hyundai R320LC‑9 and R320‑9 are the newest‑generation 32‑ton Robex machines — the ‑9 series with its refined hydraulic system, where every function is metered with more precision than the ‑7 generation that came before. At the centre of that system sits the distribution valve assembly, reference 31Q9‑16110. It takes pump flow and routes it to boom, arm, bucket, swing and tracks with the smooth, combined‑function control that separates a modern excavator from an older one.
Even on a newer machine, valve wear happens — and on a ‑9, it shows up as a loss of that refinement. The boom drifts down while holding a loaded bucket. The swing loses its feathering and overshoots. The tracks surge when an attachment is cycled. Combined functions feel clunky where they used to feel fluid. Inside the block, worn spools and scored bores are letting oil bleed across the circuits. This aftermarket distribution valve replaces the whole assembly with fresh internals, set to the correct pressures for the ‑9 hydraulics, so the old block comes off and the new one bolts straight back on.
Core Advantages
1. Restores the ‑9 series feel
The ‑9 generation's value is in refined hydraulics. Fresh spool‑and‑bore pairs bring back the smooth combined‑function work the machine had when new, instead of the clunky response of a worn valve.
2. The boom holds its load without re‑spotting
Drift under a loaded bucket is oil escaping past worn spool lands. New internals hold pressure where the lever leaves it, keeping the operator in the seat instead of constantly correcting position.
3. Swing feathering returns for precise placement
Scored bores make the house sloppy — overshoot, then a hunt back. Lapped spools restore the fine metering that lets an operator feather the swing onto the mark under a loaded bucket.
4. Flow priority restored across all circuits
The distribution valve sets whether flow goes to travel or attachments first. New internals put that order back to Hyundai's design, ending the surge when the bucket dumps and the tracks grab.
5. A complete, tested block for a modern machine
Swapping in this bench‑tested assembly is one clean exchange with the same hose positions — the practical fix for a ‑9 that is out of warranty and worth keeping precise.
Manufacturing & Quality Control
Spool and bore pairs are finished to close clearance and run‑in on the bench to confirm free movement without stick‑slip. Each completed valve is flow‑tested across its circuits, with relief and compensator settings logged before acceptance; anything off spec is stripped and reworked. The finished block is oil‑fogged, port‑plugged and crated on shock‑absorbing dunnage.
Frequently Asked Questions
Q1: Does this valve fit both the R320LC‑9 and R320‑9?
A: The platform is shared across the two builds, but port fittings can differ by year. Send the machine serial number and we confirm the correct block before dispatch.
Q2: What tells me the valve is worn?
A: Boom drift under load, loss of swing feathering with overshoot, tracks that surge when attachments are cycled, and clunky combined functions. A leak test will confirm before you buy.
Q3: Can my existing valve be repaired?
A: Often yes — if the block casting is sound, a re‑spool and seal kit can restore it. Send photos and we will advise honestly on repair versus replacement.
Q4: Do I need to update any electronics after fitting?
A: The valve itself is hydraulic — no programming needed. If the machine has altered pressure settings from previous work, have a technician re‑verify the main relief after installation.
Q5: What should be serviced at the same time?
A: The hydraulic oil and filters. Flush the circuit, change the return filter and suction strainer, so the new spools run in clean oil from day one.
Q6: What voids the warranty?
A: Materials and build defects are covered. Damage from contaminated oil, water ingress, a seized spool forced into movement or incorrect pressure adjustment is excluded. Photograph any arrival damage before uncrating.