IMA AVM/K/I/G80/822/S3R3L20 edgebander
Kaiserslautern
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 162 58...
+49 162 5858448
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Location: DE
throughfeed: door top side (cross processing)
Vertical edge: approx. 70 mm
Rebate glueing: approx. 60 mm
Strips: up to 1,3 mm
Coil material: 0,4-3 mm
Solid wood strips: 6 mm
Strip length max: 2550 mm
Strip height: 14-80 mm (depending on glue application)
Note: The technical data and descriptions are copies of the order confirmation at the time. The information is for informational purposes only and is not binding
Spindle motor power
1 pre-milling unit with 2 motors
each 3 kW
1 milling unit with 2 motors
1 kW
1 milling unit with 2 motors
660 W
Spindle speed range
12.000 rpm
Heating capacity
5,0 kW
Used single-sided rebate and edge-banding machine
For milling
edge banding and postproduction for a rebate - only on formated / pre-rabbet doors and unrebate doors
Left machine (fix stop on the left side)
Total processing in 3 throughfeeds
throughfeed: door long side
throughfeed: door long side
During 2. and 3. throughfeed the edge projection from 1. throughfeed is beeing milled by normal-reverse milling
The double rebate glueing is only possible by readjustment of the machine and manual postprocessing of the edge
Max. door thickness
Heavy machine base as carrier for units
Drive for feed speed of approx. 5-25 m/min
mechanical stepless adjustable
Transport chain with plastic plates
approx. 80 mm wide
with automatic central lubrication
Manually height-adjustable top pressure with v-belt 80 mm wide
Infeed table
1 horizontal manually adjustable unheated infeed fence
1 pre-milling unit controllable
not swivable
not tracing
Glueing unit for optional use of straight edges or softforming
by change of glue application device
Edge material
Manual side adjustment for pneumatic moveable glue application
Manual height adjustment from -15 mm up to +10 mm
1 glue application 0,8 L
max. edge height 70 mm
straight edge with pneumatic quick lock
Chem-Coat
electronic temperature control
1 hot melt glue application 0,8 L with quick-lock
edge height max. 80 mm
soft edge
Chem-Coat
with temperature control and control unit for strips
1 automatic Quickmelt hot melt glue application
1 2-fold magazine for edge material up to 3,0 mm thickness
manually mountable on the single coil magazine
1 rebate shape pressure zone for pressing of edge material to a rebate with
an activation unit 15 kW for reactivation of the edge material for rebate-shaping
a pneumatic controlled shaping tool for the bottom fold edge
a pneumatic controlled shaping tool for the complete rebate
additional pressure rollers for the edge areas with rebate
an electropneumatic side-moving device for the complete pressure zone
1 horizontal adjustment with mechanical digital readout
1 trimming unit for 2 motors mounted on top pressure for trimming of the front and rear edge/strip projection for trimming flush or with chamfer
1 milling unit for 2 motors with height tracing
side tracing
for flush milling from bottom and top
30° swivable
1 milling unit for 2 motors with height tracing
side tracing
for fine milling from bottom and top
30° swivable